Table of Contents
Advertisement
4.
Remove the band around the jack. Turn the jack
handle clockwise
to
raise the jack head a few inches.
5. Using the wheel wrench, remove the plastic cap nuts.
If your vehicle has aluminum wheels, you may have
to remove a cover plate to access
the wheel nuts. Use
the flat end of the wheel wrench to remove the cover
plate. Loosen all
the
wheel nuts. Don't remove the
wheel nuts yet.
6. Near each wheel well is a notch in the frame which
the jack head fits in. The front notch is 9 inches
(23 cm) back from the front wheel well. The rear
notch is 8 inches (20 cm) forward from the rear
wheel well. If your vehicle has flared side moldings,
both front and rear notches are 18 inches (46 cm)
from the wheel wells.
Position the jack under the vehicle. Raise the jack
head until it fits firmly into the notch in the vehicle's
frame nearest the flat tire. Put the compact spare tire
near you.
5-22
Advertisement
Table of Contents
