Samsung NZ84F7NC Series User Manual page 195

What should I do if, after the cooking zones have been
switched off, residual warmth is not indicated in the display?
Check for the following possibility:
• The cooking zone was only briefly used and therefore did not
become hot enough. If the cooking zone is hot, please call the
customer service centre.
What should I do if the cooking zone will not switch on or off?
This could be due to one of the following possibilities:
• The control panel is partially covered by a damp cloth or liquid.
• The child safety lock is on.
What should I do if the
Check for the following:
• The control panel is partially covered by a damp cloth or liquid.
To reset, press the "On/Off" control sensor.
What should I do if the
Check for the following:
• The hob is overheated because of abnormal operation.
• After hob is cooled down, press the "On/Off" control sensor for
resetting.
What should I do if the
Check for the following:
• Cookware is unsuitable or too small or no cookware has been
placed on the cooking zone.
• If you use suitable cookware, displayed message will
automatically disapear.
What should I do if the cooling fan runs after the hob is
turned off?
Check for the following:
• When you have finished using the hob, the cooling fan runs by
itself for cooling down.
• After the hob's electronics has cooled down, the cooling fan will
be turned off.
If you request a service call because of an error made in operating
the appliance, the visit from the customer service technician may
incur a charge even during the warranty period.
(Best)NZ84F7NC6AB_EE_DG68-00512A_EN.indd 35
display is illuminated?
display is illuminated?
display is illuminated?
warranty and service _35
2013-05-06 2:07:11