Table of Contents
Advertisement
Care and cleaning
5. Wipe the net fi lter (A). Brush the lint from the
fi lter with your hand. Use a soft, dry cloth to
remove any deposits.
6. Remove the foam fi lter (B) found behind the
net fi lter. Wash the foam fi lter in a washing
machine using a rinse or quick wash
programme. No detergent or hot wash is
necessary. The lint is washed away and the
fi lter is not damaged.
7. Clean the evaporator (C) by spraying water
on the ribs with a plant spray bottle. The lint
runs off together with the water, which is then
evacuated by the condensed water pump.
8. Replace both fi lters and close the evaporator
door.
NOTE!
Avoid touching the ribs on the evaporator.
They are very thin and easily damaged. If the
ribs are bent or damaged, the effi ciency of the
condenser is greatly impaired, as is the drying
result.
17
Advertisement
Table of Contents
