Using The I.link Control Panel - Sony KDP-51WS550 Primary Operating Instructions Manual

Using the i.LINK Control Panel

The DTV window appears only if the
i.LINK menus were entered while
watching a digital TV channel
After you select an i.LINK device using the Device List, the TV
displays the i.LINK Control Panel, which allows you to use the TV's
remote to control the selected i.LINK device.
1
If the i.LINK Control Panel is not already displayed, press
on the remote control.
✍
If i.LINK is pressed while the TV is displaying an analog or digital channel
(not the i.LINK device), then the Device List will appear. Select the desired
device from the list and press
2
Move the remote control's joystick
the options available in the i.LINK Control Panel.
3
Press to select a desired option.
4
Press to exit the Control Panel and view the i.LINK device
EXIT
full-screen.
✍
To exit i.LINK mode, select DTV from the Device List or press CH+/-.
The i.LINK Control Panel displays the signal from the TV to the left
(if available), and the signal from the currently selected device to the
right.
to display the Control Panel.
V v B b to navigate through
i.LINK
87