Sony KDP-51WS550 Primary Operating Instructions Manual page 36

Notes on Using This Connection
To Do This ...
Watch the DVD player
Set up the TV remote control
to operate the DVD player
Activate the TV remote
control to operate the DVD
player
Control DVD functions with
the TV remote control
Label video inputs to easily
identify equipment connected
to the TV
Do This ...
Press TV/VIDEO repeatedly to select the DVD input (VIDEO 5 in the
illustration).
If you have a non-Sony DVD player, you must program the remote control.
See "Programming the Remote Control" on pages 49-50.
Open the outside cover, as shown on page 48. Then set the A/V slide switch
to the position you programmed for the DVD player.
See "Operating a DVD Player" on page 52.
See the instructions for setting up Video Labels on pages 103-104.
✍
You cannot record the signal from any equipment connected into the Y, P
P jacks.
R
,
B
35