Using The I.link Control Panel - Sony GRAND WEGA KDF-60XBR950 Operating Instructions Manual

Using i.LINK

Using the i.LINK Control Panel

The DTV window appears only if the
i.LINK menus were entered while
watching a digital TV channel
84
After you select an i.LINK device using the Device List, the LCD projection
TV displays the i.LINK Control Panel, which allows you to use the LCD
projection TV's remote to control the selected i.LINK device.
1
If the i.LINK Control Panel is not already displayed, press
remote control.
✍
If i.LINK is pressed while the LCD projection TV is displaying an analog
or digital channel (not the i.LINK device), then the Device List will
appear. Select the desired device from the list and press
the Control Panel.
2
Press V v B b on the remote control to navigate through the options
available in the i.LINK Control Panel.
3
Press to select a desired option.
4
Press EXIT to exit the Control Panel and view the i.LINK device full-
screen.
✍
To exit i.LINK mode, select DTV from the Device List or press CH+/–.
The i.LINK Control Panel displays the signal from the LCD projection TV
to the left (if available), and the signal from the currently selected device to
the right.
on the
i.LINK
to display