Advertisement
UM: T h s setting is similar to LIVE,
however, more echo is present. The
LIVE
and
AUDITORIUM settings are best used for music.
LEVEL:
Press the plus or minus symbol on this button
to adjust the amount of effect desired when in DSP
mode. Some experimenting with this button will help
you determine the best sound.
usting the Speakers
AX,: Press this knob lightly so it extends. Turn the
knob clockwise to adjust sound to the right speakers and
counterclockwise for the left speakers. The middle
position balances the sound between the speakers.
E: Press t h s knob lightly so
it extends. Turn the
knob clockwise to adjust the sound to the front speakers
and counterclockwise for the rear speakers. The middle
position balances the sound between the speakers.
Push these knobs back into their stored positions when
you're not using them.
laying
a
Cassette Tape
With the radio on, insert a cassette tape. The tape will
begin playing as
SOQII
as it is inserted.
While the tape is playing, we the VOL, FADE, BAL,
BASS and TREB controls just as you do for the radio.
Other controls
may
have different functions when a tape
is inserted. The display will show TAPE with an arrow
to indicate which side of the tape is playing. PLAY will
appear on the display temporarily when a tape is
playing. The display will then revert back to showing
the time.
If an error occurs while trying to play a cassette tape, it
could be that:
The cassette tape is tight and the cassette player
cannot turn the hubs of the tape. Hold the cassette
tape with the open end down and try turning the right
hub counterclockwise with a pencil. Flip the tape
over and repeat. If the hubs do not turn easily, your
cassette tape may be damaged and should not be
used in the player. Try a new tape to be sure
YQUI-
player is working properly.
The cassette tape is broken. (Check to see if your
tape is broken. Try a new tape.)
Advertisement
