Advertisement
Setting the cruise control at a desired speed and then
applying the brake will end the cruise function.
.
. .
.
.
.
.
-
.
. .
. .
.
.
. .
:
-
. :
-'
Once you're going about
.
.
.
.
'
'
'
25 mph (40 krn/h) or more,
Remember, if you hold the switch at WA longer than
half a second, the vehicle will accelerate until you
release the switch or apply the brake. You could be
startled and even lose control. So unless you want to go
faster, don't hold the switch at WA.
There are two ways to
go
to
a higher speed:
Use the accelerator pedal to get to the higher speed.
Push the button at the end of the lever and then
release the button and the accelerator pedal. You'll
now cruise at the higher speed.
Move the cruise switch from ON to WA. Hold it there
until you reach a desired speed and then release the
switch. (To increase your speed in very small amounts,
move the switch to WA. Each time you do this, your
vehicle will go about 1 mph (1.6
'km/lr)
faster.)
The accelerate feature will only work after you have set the
cruise control speed by pushing the SET CRUISE button.
There are two ways to reduce your speed while using
cruise control:
Push in the button at the end of the lever until you
reach
a
desired lower speed, then release it. A
CRUISE ENGAGED message will then display.
To slow down in very small amounts, push the
button for less than half a second. Each time you do
this, you'21 go 1 rnph ( I .6 l t d h ) slower.
2-
Advertisement
