Replacing And Handling The Transistor Amplifier; Transistor Amplifier Connections - Mitsubishi MELDAS TRS50 Manual

REPLACING AND HANDLING THE TRANSISTOR AMPLIFIER

TRANSISTOR AMPLIFIER CONNECTIOk-
NC
control
unit *
command
cable
To axis
1 detector
Axis 1 amblifier
(Terminal block TEl is connected with the drive motor. The unit
be mounted onto a rack with the two setscrews.)
proper can
Insert all triangular wave setting plugs S26.
plugs Sll and S13 should be inserted.
(c) Connect the DUA-1 cable to ZP5 on the final axis.
Connect the TRA-lcable from ZP5 onthehead axis to ZP4 of
AX04
Z J 3 Z P 2 ZP1
Position sicfnal
cable
To axis
2 detector
A x i s
2
S26
E l
ZJ3 ZP2 ZPl
To axis
3 detector
Axis 3 amolifier
However, when it is used,
S26
E l
To DUA-1
Dower unit
l