Advertisement
CAUTION: (Continucd)
remove any rust or dirt from the
places where the wheel
attaches to the vehicle. In an emergency, you can use a cloth or a
paper towel to do this; but be sure to use a scraper or wire
brush later,
if
you need to,
fr)
get all the rust or dirt off.
Remove any rust or dirt from the wheel bolts, mounting surfaces or spare
wheel. Place the spare on the wheel mounting surface.
Never use oil or grease on studs or nuts.
If you do,
the nuts
might come loose. Your wheel could fall off, causing a serious
accident.
I
r
Replace the wheel
nuts with the
rounded end of the
nuts toward the
wheel. Tighten each
nut by hand until the
wheel is held against
the hub.
25 3
Advertisement
