Advertisement
STORE/RECALL
Pressing this button will store any currently displayed message that is
indicating a system problem. Once a message has been stored the
next
message
of normal
information
is
displayed.
When a message is stored it is saved in the computer, but once the
ignition is turned off the message is lost. All messages stored when your
engine is running can be viewed one at a time by pressing
"STORE/RECALIY button.
FUEL USED
RESET
Display the fuel used, then press and hold the STORE/RECALL button
until 0 is displayed.
DISPLAY ON/OFF
Pressing this button will turn off the Driver Information Center,
Electronic Climate Control and Fuel Data Center displays. While
displays are off, pressing the "INFORMATION" button will turn on only
the Driver Information Center. If any other button is pressed or a driving
warning message needs to be displayed, or fuel level falls below 4 gallons,
all the displays will come back on.
TRIP SET
Press and hold this button to set the
Trip Odometer back to zero.
ENG/MET (English/Metric)
Press this button to switch from English (miles) to metric (kilometers).
Driver Information Center Messages
These messages will appear if there is a problem sensed in one of your
vehicle's systems. Vehicles that
are
first sold in Canada or are export
vehicles will have a number after each message. This number helps to
identify that message, which is only displayed in English.
APPLY BRAKE TO SHIFT
This message will appear if your vehicle is in "P" (Park) for about 5
seconds and the brake is not depressed. If you do not want this message
to appear, you can cancel this message by pressing the OFF and the Blue
(cooler) button on the Electronic Climate control panel. Push the same
2
buttons again to have this message displayed again.
133
Advertisement
