Table of Contents
Advertisement
9
Installing the Bagger Top
Parts needed for this procedure:
2
Grass Bag
Procedure
1.
Install the bagger top to the bagger frame.
Note:
Your bagger may look different than the
one shown.
2.
Slide the brackets over the posts in the bagger
frame and install the circular cotter pin into the
hole in the right hand post
3.
Rotate the bagger hood down to the operating
position.
Note:
To remove the circular cotter pin,
continue to rotate it in the same direction as
installed.
Figure 20
1. Bagger hood
2. Bagger frame
3. Bracket, bagger hood
(Figure
20).
g016265
4. Circular cotter pin
5. Post
4.
Lift the bagger top and install the bags by sliding
the bag frame hooks onto the retaining brackets
(Figure
21).
5.
Lower the bagger top onto the bags
6.
Secure the hood with the latch
14
Figure 21
(Figure
Figure 22
(Figure
22).
g300378
22).
g033030
Advertisement
Table of Contents
