Assembling The Grass Bags; Installing The Bagger Top - Toro E-Z Vac 79345 Operator's Manual

9

Assembling the Grass Bags

Parts needed for this procedure:
2 Bag frame
2 Grass bag
Procedure
Snap the 2 bag frames to the 2 grass bags.
Figure 20
10

Installing the Bagger Top

Parts needed for this procedure:
2 Grass bag assembly
Procedure
1. Install the bagger top to the bagger frame.
Note:
Your bagger may look different than the
one shown.
2. Slide the brackets over the posts in the bagger
frame and install the circular cotter pin into the
hole in the right hand post
g453040
(Figure 21).
15
3. Rotate the bagger hood down to the operating
position.
Note:
To remove the circular cotter pin,
continue to rotate it in the same direction as
installed.
Figure 21
1. Bagger hood
2. Bagger frame
3. Bracket, bagger hood
g016265
4. Circular cotter pin
5. Post