Table of Contents
Advertisement
Heated and Cooled Seats
The front seats may have the heated and cooled seat
feature. To heat or cool the seats, the ignition must
be on.
Driver's Side Buttons
shown
J
(Heated Seat Cushion and Seatback): Press this
button to heat the seat cushion and seatback.
I
(Heated Seatback): Press this button to heat the
seatback.
H
(Cooled Seat Cushion and Seatback): Press this
button to cool the seat cushion and seatback.
The buttons are located on
the front doors forward of
the door handle.
Press each button to turn on the desired feature. A light
on that button will display indicating which feature is on.
There are three temperature settings for each feature.
A column of three lights next to the buttons will
display which setting the feature is in: high, medium or
low. Three lights indicate the highest setting, two lights
indicate medium and one light indicates the lowest
setting.
When you press a button, the feature will turn on at
the highest setting. Each time you press the button,
the feature will decrease one temperature setting.
To turn the feature off, keep pressing the button until
the display lights turn off.
If your vehicle has remote vehicle start and is started
using the remote keyless entry transmitter, the front
heated seats will be turned on to the high setting if it
is cold outside. See "Remote Vehicle Start" under
Remote Keyless Entry System Operation on page 2-6.
When the key is inserted into the ignition and the
ignition is turned on, the heated seat feature will turn
off. To turn the heated seat feature back on, press the
desired button.
1-5
Advertisement
Chapters
Table of Contents
