Buick 2005 Rainier Owner's Manual page 347

5. Check that the jumper cables do not have loose or
missing insulation. If they do, you could get a
shock. The vehicles could be damaged too.
Before you connect the cables, here are some
basic things you should know. Positive (+) will go to
positive (+) or to a remote positive (+) terminal if
the vehicle has one. Negative ( ) will go to a heavy,
unpainted metal engine part or to a remote
negative ( ) terminal if the vehicle has one. Do not
connect positive (+) to negative ( ) or you will
get a short that would damage the battery and
maybe other parts too. And do not connect
the negative ( ) cable to the negative ( ) terminal
on the dead battery because this can cause sparks.
7. Do not let the other end touch metal. Connect it to
the positive (+) terminal of the good battery. Use a
remote positive (+) terminal if the vehicle has one.
6. Connect the red
positive (+) cable to the
positive (+) terminal of
the dead battery. Use a
remote positive (+)
terminal if the vehicle
has one.
5-43