Buick 2005 Rainier Owner's Manual page 237

Battery Replacement
To change the batteries, do the following:
1. Remove the battery compartment door located on
the bottom of the remote control.
2. Replace the two AA batteries in the compartment.
Make sure that they are installed correctly, using
the diagram on the inside of the battery
compartment.
3. Close the battery door securely.
If the remote control is to be stored for a long period of
time, remove the batteries and keep them in a cool,
dry place.
Problem
No power.
Disc will not play.
Recommended Action
The ignition might not be
in on or accessory. The
parental control button
might have been turned
on. The power indicator
light will flash.
The system might be off.
The parental control
button might have been
turned on. The power
indicator light will flash.
The system might be in
auxiliary mode. The disc
is upside down or is
not compatible.
Problem
The picture does not fill the
screen. There are black
borders on the top and
bottom or on both sides or
it looks stretched out.
The disc was ejected, but
it was pulled back into the
DVD player.
In auxiliary mode, the
picture moves or scrolls.
The language in the audio
or on the screen is wrong.
The remote control does
not work.
Recommended Action
Check the display
mode settings in the
display menu.
The disc is being stored in
the DVD player. Press the
eject button again to eject
the disc.
Check the auxiliary input
connections at both
devices. Change the Video
Format to PAL or NTSC.
See "Stereo RCA Jacks"
previously for how to
change the video format.
Check the audio or
language selection in the
main DVD menu.
Check to make sure there
is no obstruction between
the remote control and the
transmitter window. Check
the batteries to make sure
they are not dead or
installed incorrectly. The
parental control button
might have been turned
on. The power indicator
light will flash.
3-117