Buick 2004 Rainier Owner's Manual page 336

5-48
6. Connect the red
positive (+) cable to
the positive (+) terminal
of the dead battery. Use
a remote positive (+)
terminal if the vehicle
has one.
7. Don't let the other end
touch metal. Connect
it to the positive (+)
terminal of the
good battery. Use a
remote positive (+)
terminal if the vehicle
has one.
Don't let the other end touch anything until the next
step. The other end of the negative ( ) cable doesn't
go to the dead battery. It goes to a heavy, unpainted
metal engine part or to the remote negative ( )
terminal on the vehicle with the dead battery. On the
L6 engine, the remote negative ( ) terminal on your
vehicle is located on the front engine lift bracket and
is marked GND. On the V8 engine, the remote
negative (–) terminal is located on the accessory
drive bracket and is marked GND.
8. Now connect the black
negative ( ) cable to
the negative ( )
terminal of the good
battery. Use a remote
negative ( ) terminal
if the vehicle has one.