Configuring Date, Time, Units Of Measurement, Contrast And Backlight; Configuring User Profile And Home - Daikin Altherma R Hybrid User Reference Manual

4 | Operation

4.6.5 Configuring date, time, units of measurement, contrast and backlight

4.6.6 Configuring user profile and home pages
User reference guide
32
To configure time and date
Prerequisite: You switched the permission level to Advanced end user.
1 Go to [1]: > Set time/date.
INFORMATION
Switch to Adv. end user to change daylight saving time and 12/24h notation.
To configure units of measurement
Prerequisite: You switched the permission level to Advanced end user.
1 Go to [7.6]: > User settings > Unit of measurement.
Possible units of measurement settings
Setting
Decimal point
Temperature
Produced energy
Flow
Efficiency
Consumed gas
To configure the contrast of the user interface
Prerequisite: You switched the permission level to Advanced end user.
1 Go to [7.1.1]: > User settings > Display > Contrast.
To configure the backlit LCD time of the user interface
Prerequisite: You switched the permission level to Advanced end user.
1 Go to [7.1.2]: > User settings > Display > Backlit LCD time.
To set a user profile
Prerequisite: You switched the permission level to Advanced end user.
1 Go to [7.1.3]: > User settings > Display > User profile.
2 Select a user profile and press
Possible user profiles
If user profile = Detailed, you can see and do more on the home pages.
Possible units of measurement
▪ Dot
▪ Comma
▪ °C
▪ °F
▪ kWh
▪ MBtu
▪ l/min
▪ GPM
▪ EU
▪
USA
▪ m³
▪
ft³
▪ kWh
.
CHYHBH05+08AF + EHYKOMB33AA
Daikin Altherma R Hybrid
4P471762-1B – 2020.10