Overview of electrical connections except external actuators ..............53 6.5.4 Overview of electrical connections for external and internal actuators............54 7 Installation Installer reference guide EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 3
7.11.11 To connect the electrical meter........................96 7.11.12 To connect the gas meter ..........................97 7.11.13 To connect the domestic hot water pump ....................97 EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 4
Checklist for yearly maintenance of the indoor unit ..................... 197 12.5 To disassemble the gas boiler............................198 12.6 To clean the inside of the gas boiler..........................201 Installer reference guide EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Indicates a situation that could result in minor or moderate injury. NOTICE Indicates a situation that could result in equipment or property damage. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Improper installation or attachment of equipment or accessories could result in electrical shock, short-circuit, leaks, fire or other damage to the equipment. Only use accessories, optional equipment and spare parts made or approved by Daikin. WARNING Make sure installation, testing and applied materials comply with applicable legislation (on top of the instructions described in the Daikin documentation).
Make sure the installation site withstands the total weight and vibration of the installation. Module Weight Hybrid module 30 kg Gas module 36 kg Indoor part (Hybrid module + gas Total weight: 66 kg module) EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Excessive refrigerant concentrations in a closed room can lead to oxygen deficiency. ▪ Toxic gas might be produced if refrigerant gas comes into contact with fire. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 10
(i.e., the cylinder is marked with "Liquid filling siphon attached") A siphon tube is NOT present Charge with the cylinder upside down. ▪ Open refrigerant cylinders slowly. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
If NOT factory installed, a main switch or other means for disconnection, having a contact separation in all poles providing full disconnection under overvoltage category III condition, MUST be installed in the fixed wiring. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 12
Install power cables at least 1 m away from televisions or radios to prevent interference. Depending on the radio waves, a distance of 1 m may not be sufficient. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
NOT strike matches or smoke, ▪ put out naked flames, ▪ open doors and windows immediately, ▪ keep people away from the affected area. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
BS 7671: 2018 Requirements for electrical installations. IET wiring regulations ▪ BS 7074: 1 Code of practice for domestic and hot water supply ▪ EN12828: 2014 Space heating for domestic premises EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 15
Potable water: all seals, joints and compounds (including flux and solder) and components used as part of the secondary domestic water system MUST be approved by WRAS. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
▪ gas boiler module. These modules MUST always be installed and used together. a Heat pump module b Gas boiler module EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 17
About the product INFORMATION This product is intended for domestic use only. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
The original documentation is written in English. All other languages are translations. Technical engineering data ▪ A subset of the latest technical data is available on the regional Daikin website (publicly accessible). ▪ The full set of latest technical data is available on the Daikin Business Portal (authentication required).
Note: There is also an installer settings table in the user reference guide. This table has to be filled in by the installer and handed over to the user. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Prepare the path along which you want to bring the unit inside in advance. 4.2 Outdoor unit 4.2.1 To unpack the outdoor unit EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
4.4 Gas boiler 4.4.1 To unpack the gas boiler Before unpacking, move the gas boiler as close as possible to its installation position. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Tear apart and throw away plastic packaging bags so that nobody, especially children, can play with them. Possible risk: suffocation. 4.4.2 To remove the accessories from the gas boiler 1 Remove the accessories. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 25
About the box a Mounting strip b Condensate trap c Installation and operation manual EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Hybrid indoor unit HBH=Hydrobox heating only HBX=Hydrobox heating and cooling Capacity class Model series Power supply 5.2.3 Identification label: Gas boiler Location EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 28
SVGW number Unit detail Description ******-yymm****** Product code-Serial No. yy = year of production, mm = month of production Product Identification Number EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
It is recommended to install this option in colder regions with possible low ambient temperatures or heavy snowfall. For installation instructions, see the installation manual of the drain pan heater. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
RTRNETA can only be used in heating-only systems. For installation instructions, see the installation manual of the room thermostat and addendum book for optional equipment. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 31
PC. It gives the possibility to upload different language files to the user interface and indoor parameters to the indoor unit. For the available language files, contact your local dealer. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 32
A set of valves for the easy connection of the field piping. For the connection of the correct kit, see the combination table. For installation instructions, see the installation manual of the valve kit. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Kit for the conversion of 60/100 concentric flue gas connections to 80/125 concentric flue gas connections. For installation instructions, see the installation manual of the concentric connection kit. Other options EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
5.3.5 Possible combinations of indoor unit and domestic hot water tank Indoor unit Domestic hot water tank EKHWP300B + EKHWP500B EHYHBH05 EHYHBH08 EHYHBX08 EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
(suction of discharge air). This may result in: ▪ deterioration of the operational capacity; ▪ frequent frost acceleration in heating operation; EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 41
Install the outdoor unit away from direct sea winds. Example: Behind the building. If the outdoor unit is exposed to direct sea winds, install a windbreaker. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
NOT affect the unit. If lateral snowfall is possible, make sure that the heat exchanger coil is NOT affected by the snow. If necessary, install a snow cover or shed and a pedestal. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
The indoor unit is designed for indoor installation only and for ambient temperatures ranging 5~35°C in cooling mode and 5~30°C in heating mode. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
The unit is only to be used in a closed water system. Application in an open water circuit can lead to excessive corrosion of the water piping. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Field supply components – Water pressure and temperature. Check that all components in the field piping can withstand the water pressure and water temperature. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 46
Zn-coated parts. Never use zinc coated parts in the water circuit. Because the internal water circuit of the unit uses copper piping, excessive corrosion may occur. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
95°C RAD1 RAD2 RAD3 a Outdoor unit b Indoor unit c Heat exchanger d Boiler e Bypass valve EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 49
0 m. Example in case of a radiator application: Maximum water volume and expansion vessel pre-pressure in case of 80°C EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Changing the pre-pressure of the expansion vessel should be done by releasing or increasing nitrogen pressure through the Schrader valve of the expansion vessel. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
The wiring to the unit is different depending on whether the power supply is interrupted or not. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
(e.g., closed contacts on white/blue days). Connect the indoor unit and gas boiler as follows: see illustration in column "Power supply is NOT interrupted" in the table above. a Normal power supply EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Power supply gas boiler 2+GND Preferential kWh rate power supply (voltage free contact) Normal kWh rate power 6.3 A supply User interface User interface EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 55
(g) Cable section 1.5 mm ; maximum length: 50 m. NOTICE More technical specifications of the different connections are indicated on the inside of the indoor unit. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Do NOT leave the unit unattended when the service cover is removed. 7.2.2 To open the outdoor unit DANGER: RISK OF ELECTROCUTION EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
7 Remove the switch box from the unit. 8 Hook the switch box to the side of the unit with the hooks foreseen on the switch box. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
"7.2.4 To open the gas boiler" [ 58]. 2 Pull the boiler controller unit forwards. The boiler controller will tip downwards to provide access. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
(field supply) as follows: INFORMATION The maximum height of the upper protruding part of the bolts is 15 mm. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 60
If the unit is installed on brackets to the wall, it is recommended to use the EKFT008CA option kit and to install the unit as follows: EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 61
Installation (mm) a Maximum snowfall height b EKFT008CA option kit EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
▪ Avoid drain water flowing over the footpath, so that it does NOT become slippery in case of ambient freezing temperatures. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
1 Prepare 2 cables as indicated in the following illustration (field supply). 2 Place the 2 cables over the outdoor unit. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
7.4.3 To install the indoor unit 1 Put the installation pattern (see box) on the wall and follow the steps as shown below. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 65
You can additionally fix the bottom side of the unit with 2 M8 bolts. 6 The unit is mounted to the wall. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
(left hand on the bottom and right hand on the top). 5 Tilt the top of the unit at the position of the indoor unit mounting bracket. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
2 Fill the condensate trap with water. 3 Slide the condensate trap as far as possible upwards onto the condensate drain connector below the gas boiler. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 68
It is recommended that any external condensate pipe is insulated and increased to Ø32 mm in order to prevent the condensate from freezing. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Connecting the refrigerant piping to the outdoor unit ▪ Connecting the refrigerant piping to the indoor unit ▪ Insulating the refrigerant piping EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Installation period Protection method Outdoor unit >1 month Pinch the pipe <1 month Pinch or tape the pipe Indoor unit Regardless of the period EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
1 Cut the pipe end with a pipe cutter. 2 Remove burrs with the cut surface facing down so that the chips do NOT enter the pipe. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Service port 2 Connect the gas refrigerant connection from the indoor unit to the gas stop valve of the outdoor unit. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Before checking the refrigerant piping Make sure the refrigerant piping is connected between the outdoor unit and the indoor unit. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
1 Charge the system with nitrogen gas up to a gauge pressure of at least 200 kPa (2 bar). It is recommended to pressurize to 3000 kPa (30 bar) in order to detect small leaks. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
NOT increase. This might be caused by e.g. the closed state of the expansion valve in the outdoor unit circuit, but does NOT present any problem for correct operation of the unit. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
1 Determining how much refrigerant to charge. 2 Charging refrigerant. 3 Filling in the fluorinated greenhouse gases label, and fixing it to the inside of the outdoor unit. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
"14.2 To pump down" [ 220] for more details. 7.9.6 To fix the fluorinated greenhouse gases label 1 Fill in the label as follows: EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
7.10.2 Precautions when connecting the water piping INFORMATION Also read the precautions and requirements in the following chapters: ▪ General safety precautions ▪ Preparation EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
10 bar (= 1 MPa) must be installed on the domestic cold water inlet connection in accordance with the applicable legislation. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
2 Install the straight brass fitting connections so that they perfectly match the connection of both modules. 3 Tighten the straight brass fitting connections. a Outlet space heating b Inlet space heating EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
(with a minimum of 0.5 bar). 6 Purge air from the water circuit as much as possible. 7 Disconnect the water supply hose from the drain point. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
When the drain pan is installed, make sure to insulate the water piping up to the drain pan to avoid condensation. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Connecting the domestic hot water pump. Connecting the alarm output. Connecting the space cooling/heating ON/OFF output. Connecting the power consumption digital inputs. Connecting the safety thermostat. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
7.11.5 To connect the electrical wiring to the indoor unit It is recommended to install all electrical wiring to the hydro box before installing the boiler. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 89
3 Fix the cable with cable ties to the cable tie mountings to ensure strain relief and to make sure that it does NOT come in contact with the piping and sharp edges. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
In case of normal kWh rate power supply 1 2 3 1 2 3 Legend: see illustration below. In case of preferential kWh rate power supply EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Result: The gas boiler performs a test. appears on the service display. After the test, appears on the service display (wait mode). The pressure in bar is shown on the main display. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
4 Put the (larger) boiler connector through the knockout hole. Fix the cable in the switch box by routing it behind the pre-mounted wires. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 93
7 Open the switch box cover of the indoor unit. 8 Plug the indoor unit connector into X39A of the indoor unit PCB. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Connect the user interface cable to the indoor unit. Fix the cable with cable ties to the cable tie mountings. a Main user interface b Optional user interface EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
For more information, see the installer reference guide. 1 Connect the valve control cable to the appropriate terminals as shown in the illustration below. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
1 Connect the electrical meters cable to the appropriate terminals as shown in the illustration below. 2 Fix the cable with cable ties to the cable tie mountings. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
7.11.14 To connect the alarm output 1 Connect the alarm output cable to the appropriate terminals as shown in the illustration below. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
7.11.16 To connect the power consumption digital inputs 1 Connect the power consumption digital inputs cable to the appropriate terminals as shown in the illustration below. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
1 Connect the safety thermostat (normally closed) cable to the appropriate terminals as shown in the illustration below. 2 Fix the cable with cable ties to the cable tie mountings. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
4 Check all parts for gas leaks on a pressure of maximum 50 mbar (500 mm H O). There may be no stress on the gas supply connection. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
7.13.1 To change the gas boiler to 80/125 concentric connection The concentric connection can be changed from Ø60/100 to Ø80/125 by an adapter set. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Make sure that the connections are not mixed. 6 Check the connection of the internal flue pipe and the condensate collector. Make sure it is properly connected. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Total piping length = sum of the straight pipe lengths + sum of the equivalent pipe length of bends/elbows. 7.13.4 Appliance categories and pipe lengths Following installation methods are supported by the manufacturer. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 105
Air supply from existing duct. and the duct. Flue gas discharge via the roof. Air supply and flue gas discharge are in the same pressure zone. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 106
L2. For example: if the length of L1 is 2 m, L2 can maximally be 8 m long. L2=–1.8×L1+11.8 Multi-boiler installation INFORMATION All piping lengths in the tables below are maximum equivalent piping lengths. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 107
Special remark regarding C : See the table below for the minimum diameters of the combined gas exhaust system. Number of units Minimum Ø EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Gas exhaust/air intake parts can be bought from a third party. All parts purchased from an external supplier MUST comply with EN14471. b NOT allowed. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
The 60/100 mm horizontal flue system may be extended up to a maximum length as specified in the table indicating the maximum pipe lengths. Calculate the equivalent length according to the specifications in this manual. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
The maximum length of the horizontal flue including the terminal but excluding the initial elbow from the boiler and 500 mm vertical condensing tube is 7 m. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
To allow visual inspection, without reliance on devices such as endoscopes, cameras and mirrors, inspection hatches must be provided along the entire length of the flue. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
▪ Every system MUST contain at least 1 bracket. ▪ Position the first clamp at a maximum of 500 mm from the gasboiler. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
It is recommended that the refrigerant piping between indoor and outdoor unit is installed in a ducting or the refrigerant piping is wrapped with finishing tape. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
7.16 Finishing the gas boiler installation 7.16.1 To perform an air purge on the gas supply 1 Turn once the screw counterclockwise. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
2 Tilt the bottom side of the front panel towards the gas boiler. 3 Screw both screws of the cover. 4 Close the display cover. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Accessing settings via the code in the overview Code settings. For example: [C-07] See also: ▪ "To access the installer settings" [ 120] ▪ "8.1.5 Menu structure: Overview installer settings" [ 169] EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 120
> Information > User permission level. 2 Press for more than 4 seconds. Result: Your user permission level is now Installer. The home pages display . EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 121
Overview settings Scroll Confirm Adjust Result: The value to be modified is now highlighted. 4 Modify the value by using the button. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 122
Data difference detected. Please select action: Send data Adjust Confirm 4 To make the data equal on both user interfaces, select the required action: EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 123
1 At power ON and as long as the system layout was not confirmed yet, select your preferred language. Language Select the desired language Confirm Adjust 2 Set the current date and time. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
The system can heat up or cool down a space. Depending on the type of application, the space heating/cooling settings must be made accordingly. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 125
In room. ▪ In room (default): this user interface acts as room thermostat. The other user interface is automatically set to At unit EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 126
▪ a: Add LWT zone ▪ b: Main LWT zone ▪ c: Mixing station EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 127
Space heating/cooling control (user interface) b: OFF c: On d: Pump operation continued >> EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 128
Space heating/cooling control (user interface) b: OFF c: On d: Heating demand (by ext RT or RT) e: Pump operation EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 129
What kind of domestic hot water tank is installed? ▪ 4 (Type 5). EKHWP. ▪ 6 (Type 7) Third-party tank. Range: 0~6. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 130
Domestic hot water pump installed for instant hot water a Indoor unit b Hot water connection on boiler c Domestic hot water pump (field supply) EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 131
(X2M/1 and 2). Select this value in case of connection with the wired (EKRTWA) or wireless (EKRTR1) room thermostat. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 132
1 (Yes): Installed. The domestic hot water tank can –besides by the boiler– also be heated by thermal solar panels. Set this value if thermal solar panels are installed. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 134
The basic required settings in order to configure the space heating/cooling of your system are described in this chapter. The weather-dependent installer settings define the parameters for the weather-dependent operation of the unit. When EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 135
Remark: This value can only be set in leaving water temperature control. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 136
[1‑07] [1‑08] [1‑09] [1-08] [1-09] [1-06] [1-07] ▪ : Target leaving water temperature (main) ▪ : Outdoor temperature continued >> EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 137
Weather dep. (default): The desired leaving water temperature is: weather-dependent (i.e. depends on the outdoor ambient temperature) fixed in time (i.e., NOT scheduled) continued >> EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 138
Set weather-dependent heating: [0‑01] [0‑02] [0-01] [0‑03] [0-00] [0-03] [0-02] ▪ Target leaving water temperature (additional) ▪ : Outdoor temperature continued >> EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 139
Only for EHYHBX08. Set weather- dependent cooling: [0‑05] [0‑06] [0‑07] [0-05] [0-04] [0-07] [0-06] ▪ Target leaving water temperature (additional) ▪ : Outdoor temperature continued >> EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 140
For EHYHBH05: 13 l/min (default) ▪ For EHYHBH/X08: 15 l/min (default) The default values have been set to optimise comfort and performance. Take care when changing them. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 141
▪ Yes (default): enabled. Note: The desired leaving water temperature can only be read out on the user interface EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 142
During the quick heat up function, the setpoint of the gas boiler will be the maximum heating setpoint: [9‑00]. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 143
During disinfection of the domestic hot water tank, the DHW temperature can exceed this maximum temperature. INFORMATION Limit the maximum hot water temperature according to the applicable legislation. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Code Description Preset leaving water temperature for the main leaving water temperature zone in case of NOT weather dependent EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 145
Example: Set the minimum leaving water temperature to 28°C to avoid NOT to be able to heat up the room: leaving water temperatures MUST be sufficiently higher than the room temperatures (in heating). EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 146
This overshoot temperature applies to the heat pump leaving water temperature. Note that when the gas boiler is operating, there can be a 5°C overshoot over the desired boiler leaving water temperature. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 147
Code Description [1-04] Weather dependent cooling of the main leaving water temperature zone is… ▪ 0 (disabled) ▪ 1 (enabled) (default) EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 148
[ 9-0C ] a Room temperature b Actual room temperature EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 149
+ LWT add), room frost protection –if enabled– will remain active. INFORMATION If a U4 error occurs, room frost protection is NOT guaranteed. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 150
ON on the user interface, and the auto emergency setting ([A.6.C]) is set to "1". Additionally, limited frost protection by the unit is possible: EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 151
4°C, then the unit will supply leaving water to the heat emitters to heat up the room again, and the leaving water temperature setpoint will be lowered. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 152
Space heating OFF temp: When the averaged outdoor temperature raises above this value, space heating is turned OFF to avoid overheating. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 153
Guard timer to prevent too frequent changing from heating to cooling and vice versa. Changeover settings related to the outdoor temperature (ONLY when automatic is selected): EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 154
NOT been reached. Only program a storage stop when tank heating is absolutely undesirable. Code Description [7.4.3.1] [6-0A] 30°C~[6‑0E]°C (default: 60°C) EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 155
Note: When the displayed tank temperature is weather dependent, it cannot be adjusted on the user interface. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 156
The disinfection function settings MUST be configured by the installer according to the applicable legislation. CAUTION Make sure to activate the disinfection function when a third-party tank is installed. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 157
Be sure that the disinfection function start time [A.4.4.3] with defined duration [A.4.4.5] is NOT interrupted by possible domestic hot water demand. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 158
However, to maximise the energy output of the heat pump, it is possible to prevent the gas boiler from operating EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 159
[5‑03] Space heating priority temperature. Defines the outdoor temperature which below the backup heater will assist during domestic hot water heating. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 160
(X5M/3+4) as the safety thermostat. It is only possible for the system to have EITHER preferential kWh rate power supply OR a safety thermostat. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 161
The final decision to allow power interruption of the outdoor unit during standstill depends on the ambient temperature, compressor conditions and minimum internal timers. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 162
[A.6.3.2] [4-09] Type: ▪ 0 (Current): The limitation values are set in ▪ 1 (Power)(default): The limitation values are set in kW. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 164
This functionality is only valid in specific conditions where it is preferable to keep the pump active when T <4°C (pump will be activated for 10 minutes and deactivated after 10 minutes). Daikin shall NOT be held liable for any damage resulting this functionality. Code Description [F‑09]...
Page 165
The maximum values depend on the unit type: [9-0D]=0 [9-0D]=5 a (kPa) a (kPa) b (l/min) b (l/min) [9-0D]=6 [9-0D]=7 a (kPa) a (kPa) b (l/min) b (l/min) EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 166
Configuration [9-0D]=8 a (kPa) b (l/min) a External static pressure b Water flow rate EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 168
[7.7.2] Additional Set weather-dependent heating Set weather-dependent cooling INFORMATION Depending on the selected installer settings and unit type, settings will be visible/ invisible. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
UFH screed dryout Air purge Actuator test run INFORMATION Depending on the selected installer settings and unit type, settings will be visible/ invisible. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
If there is no need for immediate hot water delivery, the domestic hot water comfort function can be turned off. To reset the gas boiler INFORMATION Resetting is only possible when an error occurs. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 171
▪ Press the button to load the default settings of the gas boiler. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 172
Maximum supply temperature 30°C~90°C 90°C Do NOT modify this setting on of the heat curve the boiler. Use the user interface instead. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 173
23%~50% Adjustment range 23~50% (40=propane). (not applicable for It is recommended not to Switzerland) modify this setting in case of natural gas. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 174
Number of eco days. 1~10 Number of eco days. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 175
3 Remove the front panel from the appliance. 4 Unscrew the coupling (a) above the gas valve and twist the gas mixing tube towards the rear (b). EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 176
The gas boiler is configured for operation with gas type G20 (20 mbar). However, if the gas type present is G25 (25 mbar), the gas boiler can still be operated without modification. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 177
Natural gas Natural gas Propane P Propane P power G25 (in Belgium) (30/50 mbar) (37 mbar) Maximum value 10.8 Minimum value EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 178
2 Turn the screw (a) to increase (clockwise) or decrease (counterclockwise) the percentage. See the table below for the desired value. a Adjusting screw with cover EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 179
6 Press and simultaneously to exit the test program. 7 Put the front panel back in its place. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Pump overrun of space heating After each space heating operation, the pump continues to run. This function is controlled by the indoor unit. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 182
The space heating supply temperature must be set on the user interface of the hybrid module. See the user reference guide for more details. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
This phenomenon is caused by the compressor, that needs a continuous run time of 50 hours before reaching smooth operation and stable power consumption. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
There are NO refrigerant leaks. The refrigerant pipes (gas and liquid) are thermally insulated. The correct pipe size is installed and the pipes are properly insulated. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
> Information > Sensor information > Flow rate to check the flow rate. During pump test run operation, the unit can operate below this minimum required flow rate. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
During air purge function, pump speed limitation [9‑0D] is NOT applicable. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 187
8 Use the and buttons to set the desired position of the 3-way valve. Result: SHC or Tank 9 Set the desired position of the bypass valve. Use the and buttons to scroll to Bypass. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
(heating/cooling mode) and tank temperature (domestic hot water mode). To monitor the temperature, go to [A.6] and select the information you want to check. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
The setpoint during a boiler test run is 40°C. Keep in mind the 5°C overshoot that is possible during boiler operation, especially in combination with floor heating loops. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
The installer can program up to 20 steps. For each step he needs to enter: 1 the duration in hours, up to 72 hours, 2 the desired leaving water temperature, up to 55°C. Example: EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 191
Result: The underfloor heating screed dryout starts and following screen will be shown. It stops automatically when done. To stop it manually, press , select OK and press EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
6 Modify and restart the execution of the program. 10.4.6 To perform a gas pressure test 1 Connect a suitable gauge on the gas valve. Static pressure MUST be 20 mbar. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Burner ON, maximum and (1×) space heating power setting Burner ON, maximum and (2×) domestic hot water setting Stop test program Actual situation EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 194
Commissioning NOTICE If an 81‑04 error occurs, then do NOT perform a test run on the gas boiler. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Show the user what to do for the maintenance of the unit. ▪ Explain the user about energy saving tips as described in the operation manual. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
It is recommended to clean the heat exchanger yearly. A blocked heat exchanger can lead to too low pressure or too high pressure leading to worse performance. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Pressure relief valve of the domestic hot water tank (field supply) Open the valve. CAUTION Water coming out of the valve may be very hot. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
5 Wait until the appliance has cooled down. 6 Unscrew the coupling nut at the base of the flue pipe by turning counterclockwise. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 199
8 Pull the bottom of the pipe forwards and remove the pipe downwards by turning the pipe alternately clockwise and counterclockwise. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 200
9 Lift the condensate drain pan on the left-hand side from the connection to the condensate trap. 10 Turn it to the right with the condensate trap connection over the edge of the base tray. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
1 Clean the heat exchanger from top to bottom with a plastic brush or compressed air. 2 Clean the underside of the heat exchanger. 3 Clean the condensate drain pan with water. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Make sure in doing this that the back of the condensate drain pan comes to rest on the lug of the back of the base tray. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 203
17 Fit the casing, tighten the 2 screws on the left and right side of the display. 18 Close the display cover. 19 Check the heating and hot water supply. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
MUST NOT be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly turned ON and OFF by the utility. DANGER: RISK OF BURNING/SCALDING EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Make sure that the water volume in the too low installation is above the minimum required value (see "6.4.3 To check the water volume and flow rate" [ 48]). EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Type > Scheduled only is selected, it is recommended to program a Storage eco 3 hours before the scheduled start-up of the disinfection function to preheat the tank. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
S1 or S2 faulty. codes of the gas boiler" [ 218]. Burner does NOT ignite. "13.3.11 Symptom: The burner does NOT ignite" [ 209]. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Check the display of the gas boiler for more information. The indoor unit has an error code. Check for possible errors on the indoor unit. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Returning water temperature sensor problem. Please contact your dealer. Loosehanging tank temperature sensor Leaving water temperature sensor problem. Please contact your dealer. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 213
EEPROM reading error. Backup heater overheated. Power reset required. Please contact your dealer. Tank disinfection function completed correctly. Too long DHW heat-up time required. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 214
Bypass valve turning error Please contact your dealer. Under floor heating screed dryout function not completed correctly. Indoor/outdoor unit communication problem. User interface communication problem. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 215
Check the domestic hot water circuit. The water flow problems mainly occurred during space heating operation. Check the space heating circuit. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 216
Please contact your dealer. OU: Compressor startup defect. Please contact your dealer. OU: Malfunction of outdoor unit fan motor. Please contact your dealer. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 217
Please contact your dealer. OU: Malfunction of discharge pipe thermistor. Please contact your dealer. OU: Malfunction of heat exchanger thermistor. Please contact your dealer. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 218
Following table shows a list of error codes and the possible solutions. Error code Cause Possible solution 10, 11, 12, Sensor fault S1 ▪ Check wiring 13, 14 ▪ Replace S1 EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 219
Wiring between fan and casing ▪ Check wiring for poor wire contact ▪ Replace fan 29, 30 Gas valve relay fault Replace boiler controller EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
4 Check on the manifold if the vacuum is reached. 5 After 2-3 minutes, close the gas stop valve and stop forced cooling. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
5°C (see temperature read out of the indoor unit). You can achieve this, for example, by activating all fans of the fan coil units. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Technical data 15 Technical data A subset of the latest technical data is available on the regional Daikin website (publicly accessible). The full set of latest technical data is available on the Daikin Business Portal (authentication required). 15.1 Piping diagram: Outdoor unit...
Notes to go through before starting the Notes to go through before starting the unit unit Indoor/outdoor communication Field wiring terminal for AC Field wiring terminal for DC EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 226
Position in switch box English Translation Position in switch box Position in switch box Legend Main PCB (hydrobox) User interface PCB On/OFF thermostat EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 227
Gas meter pulse input Safety thermostat S6S~S9S Digital power limitation inputs SS1 (A4P) Selector switch TR1, TR2 Power supply transformer Terminal strip Connector EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 228
Normally open Safety thermostat contact: 16 V DC Safety thermostat contact: 16 V DC detection (voltage supplied by PCB) detection (voltage supplied by PCB) EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 229
Only for heat pump convector Only for heat pump convector Only for wired thermostat Only for wired thermostat Only for wireless thermostat Only for wireless thermostat EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 230
4 core Heat pump part Gas boiler part 3 core unit power supply: 230 V + earth X2: 2-4-earth Gas boiler 3D082242-1A EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Note: Selecting a flow outside the area of operation can cause damage or malfunction of the unit. Water quality MUST be according to EN directive EC98/83EC. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Maximum space heating water temperature 90°C Nominal load (upper value) Q 8.2~30.0 kW Nominal load (lower value) Q 7.6~27.0 kW Output at 80/60°C (P 7.5~26.6 kW Nominal output 8.2~26.6 kW EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 234
Water side heat exchanger Aluminium, copper Space heating water circuit Space heating piping connections Ø22 mm Piping material Safety valve See indoor unit manual Manometer Digital EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Any modifications to the gas valve MUST be performed by a certified representative of the manufacturer. For more information, contact your dealer. EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Page 238
Local Authority Building Control (LABC) either directly or through a Competent Persons Scheme. A Building Regulations Compliance will then be issued to the customer. www.centralheating.co.uk www.centralheating.co.uk EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA Installer reference guide Daikin Altherma hybrid heat pump 4P355634-1F – 2020.10...
Optional equipment Equipment made or approved by Daikin that can be combined with the product according to the instructions in the accompanying documentation. Field supply Equipment NOT made by Daikin that can be combined with the product according to the instructions in the accompanying documentation.
Field settings table ID66F3 [6.8.2] = ..Applicable indoor units *HYHBH05AAV3 *HYHBH08AAV3 *HYHBX08AAV3 *HYHBH05AFV3 *HYHBH08AFV3 *HYHBX08AFV3 Notes 4P353731-1H - 2021.02...
Page 242
Field settings table Installer setting at variance with default value Breadcrumb Field code Setting name Range, step Date Value Default value User settings └─ Preset values └─ Room temperature 7.4.1.1 Comfort (heating) [3-07]~[3-06], step: A.3.2.4 21°C 7.4.1.2 Eco (heating) [3-07]~[3-06], step: A.3.2.4 19°C 7.4.1.3 Comfort (cooling)
Page 243
Field settings table Installer setting at variance with default value Breadcrumb Field code Setting name Range, step Date Value Default value A.2.1.8 [7-02] Number of LWT zones 0: 1 LWT zone 1: 2 LWT zones A.2.1.9 [F-0D] Pump operation mode 0: Continuous 1: Sample 2: Request...
Page 244
Field settings table Installer setting at variance with default value Breadcrumb Field code Setting name Range, step Date Value Default value A.4.1 [6-0D] 0: Reheat only 1: Reheat + sched. 2: Scheduled only └─ Disinfection A.4.4.1 [2-01] Disinfection 0: No 1: Yes A.4.4.2 [2-00]...
Page 245
Field settings table Installer setting at variance with default value Breadcrumb Field code Setting name Range, step Date Value Default value [0-0B] Leaving water value for high ambient temp. for DHW WD curve. 35~[6-0E]°C, step: 1°C 55°C [0-0C] Leaving water value for low ambient temp. for DHW WD curve. 45~[6-0E]°C, step: 1°C 60°C [0-0D]...
Page 246
Field settings table Installer setting at variance with default value Breadcrumb Field code Setting name Range, step Date Value Default value [5-06] What is the requested limit for DI2? 0~50 A, step: 1 A 50 A [5-07] What is the requested limit for DI3? 0~50 A, step: 1 A 50 A [5-08]...
Page 247
Field settings table Installer setting at variance with default value Breadcrumb Field code Setting name Range, step Date Value Default value [9-0E] 0~8,step:1 [A-00] [A-01] [A-02] [A-03] [A-04] [B-00] [B-01] [B-02] [B-03] [B-04] [C-00] Domestic heating water priority. 0: Solar priority 1: Heat pump priority [C-01] [C-02]...
Page 248
Field settings table Installer setting at variance with default value Breadcrumb Field code Setting name Range, step Date Value Default value [F-04] [F-05] [F-06] [F-09] Pump operation during flow abnormality. 0: Disabled 1: Enabled [F-0A] [F-0B] Close shut-off valve during thermo OFF? 0: No 1: Yes [F-0C]...
Page 252
4P355634-1F 2020.10 Verantwortung für Energie und Umwelt...