Room Thermostat Control - Using The Room Temperature Home - Daikin Altherma R Hybrid User Reference Manual

Hide thumbs Also See for Altherma R Hybrid:
Table of Contents

Advertisement

4
|
Operation
4.4.3 Room thermostat control - Using the room temperature home pages
Typical room temperature home pages
User reference guide
16
You can...
Change the mode from scheduled to preset value.
If you do this, you also have to define (in the menu
structure):
Preset values
Overrule period (Temperature lock)
Select which room temperature schedule you want to
use.
Program schedules.
Define preset values that are used by the room
temperature schedule, and when you change the
mode from scheduled to preset value.
See also:
"4.4.3  Room thermostat control - Using the room temperature home
4
pages" [
 16]
"To set the overrule
period" [
"4.7 Preset values and
Leaving water temperature of the main zone
To control the leaving water temperature of the main zone, you can do the
following:
You can...
Read out the desired leaving water temperature.
Adjust the leaving water temperature.
Condition: Leaving water set point is NOT linked with
the room temperature set point.
Only change this if the desired room temperature
cannot be reached.
Define preset values.
Condition: Leaving water set point is linked with the
room temperature set point.
Only change this if the desired room temperature
cannot be reached.
See also:
"4.4.4  Room thermostat control - Using the leaving water temperature home
4
pages" [
 20]
"4.7 Preset values and
Depending on the user profile, the user interface gives you either a basic or a
detailed home page. To set the user profile, refer to
4
and home
pages" [
 32].
4
 19]
4
schedules" [
 34]
4
schedules" [
 34]
Location
Room temperature home
page if user profile =
Detailed
Menu structure
Location
Leaving water
temperature home page
(main)
Menu structure
"4.6.6 Configuring user profile
CHYHBH05+08AF + EHYKOMB33AA
Daikin Altherma R Hybrid
4P471762-1B – 2020.10

Advertisement

Table of Contents
loading

Table of Contents