Outside Power Mirrors - Buick 2004 LeSabre Owner's Manual

2. Press and hold COMPASS (or the on/off button for
mirrors equipped with OnStar
zone number appears in the display.
3. Once a zone number appears in the display, press
the COMPASS button (or the on/off button for
mirrors equipped with OnStar
the correct zone number appears in the display.
Stop pressing the button and the mirror will return to
normal operation. If C appears in the compass
window, the compass may need calibration. See
"Compass Calibration" explained previously.
®
controls) until a
®
controls) quickly until

Outside Power Mirrors

Press the left or right side of the L/R selector switch
located beneath the control pad to choose the left
or right mirror.
To adjust the mirror, press one of the four arrows
located on the control pad to move the mirror in the
direction you want it to go. When finished adjusting the
mirrors, leave the L/R selector switch in the center
position, to prevent unwanted mirror movement in case
the control pad is accidentally bumped while driving.
Adjust each outside mirror so that you can see a little of
your vehicle, and the area behind your vehicle.
The controls for the
outside power mirrors are
located on the driver's
door armrest.
2-35