Buick 2003 Regal Owner's Manual page 132

Table of Contents

Advertisement

To change the passenger compartment air filter, use the
following steps:
1. Turn off the ignition when the windshield wipers are
2. Raise the hood.
in the up position.
3. Disconnect the windshield washer pump hose from
the fender rail and air inlet grille.
4. Remove the hood weatherstrip from the passenger's
side of the vehicle (peel back halfway to center).
5. Remove the three air inlet grille retainers.
6. Remove the air inlet grille.
7. Remove the passenger
compartment air filter.
8. Then replace the old air filter with the new one. For
the type of filter to use, see Normal Maintenance
Replacement Parts on page 5-96.
9. Reinstall the air inlet grille.
10. Reinstall the air inlet grille retainers.
11. Reattach the hood weatherstrip.
12. Reconnect the windshield washer pump hose to the
fender rail and air inlet grille.
13. Close the hood.
14. Return the windshield wipers to the park position.
3-27

Advertisement

Table of Contents
loading

Table of Contents