Buick 2000 LeSabre Owner's Manual page 234

Don't let the other end touch anything until the next
step. The other end of the negative (
to the dead battery.
8. Now connect the black
-
negative ( ) cable to
the good battery's
-
negative ( ) terminal.
-
) cable doesn't go
9. Now start the vehicle with the good battery and run
the engine for a while.
10. Try to start the vehicle with the dead battery. If it
won't start after a few tries, it probably needs service.
11. Remove the cables in reverse order to prevent
electrical shorting. Take care that they don't touch each
other or any other metal. Replace the red positive (+)
remote terminal cover to its original position.
yellowblue
It goes to a heavy,
unpainted metal part on
the engine of the vehicle
with the dead battery.
5-7