Remove/Replace Noise Filter; Replace Transformer - Fellowes Proteus A3/125 Technical & Service Manual

Replace Noise Filter
1
Disconnect the 2 input wires from right side of
Noise Filter .
2
Disconnect the 2 output and 1 grounding wire from
left side of the Filter .
3
Remove the 2 screws that hold the Filter to the
Metal Bottom Plate .
4
Place the new Noise Filter and secure it with the
2 screws .
5
Reconnect input, grounding, and output wires .

Replace Transformer

1
Disconnect the 2 wires from the Noise Filter .
2
Disconnect the 2 wires from Main PCB (rear next to
the Roller Assembly) .
3
Unscrew and open the wire holders on right and left
side of Main PCB .
Wire Holder
Proteus A3/125 Technical Service Manual
Mounting Screws
DO THIS FIRST
Remove Housing Cover
TOOLS
Long nose pliers
Phillips screwdrivers
DO THIS FIRST
Remove Housing Cover
TOOLS
Long nose pliers
Phillips screwdrivers
Revised 09 .15 .11
21