4
2-
General Information
1General Remarks
Safety Information
The DHHS regulations have been met in this monitor under the following circumstances:
•
No components may be replaced on the board level and no adjustments (potentiome-
ters) may be made in the power supply (with high voltage)!
Exception: when a modification or upgrade is initiated by an AUI, etc.
•
Line power is present at the heat sink of the power supply to the frame, there is a risk of
contact if the monitor is opened, even in the standby mode!
WARNING
SIMOMED HM
When handling the monitor, there is a risk of implosion of the pic-
ture tube!
If not observed, death or serious bodily injury can occur.
The required protective clothing must be worn.
RA52-060.061.01.07.02
07.02
General Remarks
Page 4 of 24
TD SD 21
0
0
Siemens AG
Medical Solutions