Table of Contents
Advertisement
Connecting
6.1
General connection information
Caution
All information and warnings for this product must be observed in order to guarantee
operation free of danger.
The unit is designed for a point-to-point connection to a graphics card.
Caution
Observe shielding measures
All shielding precautions contained in the corresponding EMC guidelines must be observed.
If these guidelines are not observed, interference signals could penetrate and disturb the
display operation.
Information on cable installation
• Only shielded cables are permitted for all signal connections.
• All cable connections must be screwed or clamped.
• Signal and power cables must not be routed in the same duct.
• The display must not share a power supply with motors or valves (glitches!).
See also
Safety notes (Page 2-1)
Electromagnetic compatibility (Page 11-6)
SMD 18101 CS / SMD 18101 CP / SMD 18101 D
Instruction Manual, 11/2005, A5E00472377A-002
6
6-1
Advertisement
Table of Contents
