Advertisement
Distributor of Fluke Electronics: Excellent Integrated System Limited
Datasheet of I800 - CURRENT CLAMP PROBE AC
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
Weight
Cable Length
Overload Conditions
Duty Cycle
Safety Standards
EN 61010-1: 2001
EN 61010-2-032: 2002
EN 61010-031: 2002
600 V rms, Category III, Pollution Degree 2
Use of the clamp on uninsulated conductors is limited to 600 V
ac rms or dc and frequencies below 1 kHz.
CAT III equipment is designed to protect against the transients in
the equipment in fixed equipment installations, such as
distribution panels, feeders and short branch circuits, and the
lighting systems in large buildings.
EMC Standards
EN 61326 :1998 +A1, A2, & A3
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and
workmanship for one year from the date of purchase. This
warranty does not cover fuses, disposable batteries, or damage
from accident, neglect, misuse, alteration, contamination, or
abnormal conditions of operation or handling. Resellers are not
authorized to extend any other warranty on Fluke's behalf. To
obtain service during the warranty period, contact your nearest
Fluke authorized service center to obtain return authorization
information, then send the product to that Service Center with a
description of the problem.
650 g
1.6 meters
Operation above 1200 A
should be limited to
frequencies below 1 kHz
1500 A at 50 / 60 Hz for 1
hour, 33 % duty cycle
(20 min ON, 40 min OFF).
Advertisement
