Advertisement
G3PA-(VD)
Linking Terminal Connection
Connecting with linking terminal for G3PA-210B-VD,
-220B-VD, -240B-VD and G3PA-420B-VD, G3PA-430B-VD.
SSR1
SSR2
1. When SSRs are close
mounted,
loosen
the
M3.5 Sems screw and
flip the linking terminal
down.
Connect the terminal with power off.
Refer to the instruction manual for
the G32A-A Power Device Cartridge
to replace the G3PA's triac part.
When the temperature indicator has turned from pink to red, the G32-A-A Power Device Car-
tridge may have malfunctioned, in which case the cartridge must be replaced with a new one.
144
SSR1
SSR2
2. Insert the linking
terminal securely
into the center of
the screw and
tighten the screw.
Linking terminal
Linking terminal
Connecting with linking terminal for G32A.
SSR
G32A Unit
1. When SSR are close
mounted, loosen the
M3.5 Sems screw on
the G32A and flip the
linking terminal down.
G3PA-420B-VD
Linking
terminal
Linking
terminal
Use the terminal cover to prevent accidents
due to electric shock.
G3PA-(VD)
SSR
G32A Unit
*
* The cover will not fit if
the terminal protrudes.
2. Insert the linking termi-
nal securely into the
center of the screw and
tighten the screw. En-
sure that the linking
terminal does not pro-
trude.
Advertisement
