Preliminary Requirements; Required Tools And Components; Prerequisite Steps - Microsoft Surface Pro 7+ for Business WIFI Removal Procedure

SSD Replacement Process

Preliminary Requirements

IMPORTANT:

Required Tools and Components

• Tools:
o Torx-plus screwdriver 3IP
Anti-static wrist strap (1M Ohm resistance)
o
o Soft ESD safe mat
Microfiber / Lint free cloth
o
o SIM eject tool
• Components:
o SSD (multiple options)
8LT-00001
8LV-00001
8LX-00001
8LU-00001
SSD Door (multiple options)
o
8LS-00001
8LS-00002

Prerequisite Steps:

Power off device – Ensure device is powered off and disconnected from a power supply.
•
• General Safety – Check to make sure that general guidelines and ESD compliance steps are followed prior to
opening the device. Refer to Prior to Device Disassembly section
Position device – To prevent scratches, flip device over onto a clean Soft ESD safe mat free of debris with the
•
device bottom facing up.
10
Be sure to follow all special (bolded) notes of caution within each process section.
SSD 128GB
SSD 256GB
SSD 512GB
SSD 1TB
Platinum SSD Door
Black SSD Door
(page
M1177096
9) for details.