Drain the Water from the Seat
CAUTION! Risk of product damage. When the seat is not used for a
long time or environmental temperature may have dropped to below
freezing, the water should be drained from the seat.
Turn off the water supply and unplug the unit.
Remove the seat from the toilet. Refer to the "Remove the Seat" section.
Drain the water from the seat.
Reinstall the drain plug.
Troubleshooting
This troubleshooting guide is for general aid only. A Kohler Authorized Service
Representative or qualified electrician should correct all electrical problems. For
warranty service, contact your dealer or wholesale distributor.
General Functions
Symptoms
1. Funtions are not
working
1223525-T01-M
Remove plug with coin.
Probable Causes
A. Power failure occurred.
B. The power cord is disconnected.
C. Power cord suffers electricity
leakage. Connector plug
is not reset.
D. You have not touched the seat
sensing area.
E. Thermal protector to open
automatically to protect.
F. None of the above actions
correct the symptom.
Recommended Action
A. Wait until the power is restored.
B. Insert the power cord into an
electrical outlet.
C. Press the "Reset" icon on the
plug.
D. You have to sit inside the seat
sensing area.
E. Allow the seat to cool to room
temperature.
F. Contact a KOHLER Service
Representative.
18
Kohler Co.