Function Operation - STEINEL IS 3360 Operation Manual

IS 3180 (Fig� 5�10)
Mounting
height
Setting level tangential
1.5 m 8
–
–
–
20
2.0 m 8
–
–
–
20
2.5 m 8
–
–
–
20
3.0 m 8
–
–
–
20
Note:
The factory setting is 20 m
• Fit sensor and load module together and screw into place.
• Switch ON power supply�
• Set functions. (➔ "6� Function")
• Fit designer trim.
6� Function / operation
Factory settings
Twilight level: 1000 lux
Time setting: 5 s
Twilight setting (Fig� 6�1)
The chosen sensor response threshold is infinitely adjustable from approx. 2-1000 lux.
Control dial means twilight mode at approx. 2 lux.
Control dial means daylight operation / independent of ambient light level.
Teach mode
The control must be set to
respond to movement from now on. The level of ambient brightness measured in this
way will be saved after 10 seconds. The load is deactivated during this period.
20 m lens
radial
5 m 2.5 m
6 m 2.5 m
7 m 3.0 m
8 m 3.0 m
12 m 4.5 m
5 m 2.5 m
6 m 3.0 m
7 m 3.5 m
10 m 4.0 m
20 m 4.5 m
6 m 3.0 m
8 m 4.0 m
10 m 5.0 m
13 m 5.0 m
20 m 4.0 m
8 m 4.0 m
9 m 4.5 m
12 m 5.0 m
17 m 4.0 m
20 m 4.0 m
at the level of light at which you want the sensor to
30
8 m lens
Setting level tangential
4 3 m
– 5 m
– 6 m
– 7 m
8 9 m
4 4 m
– 5 m
– 6 m
– 8 m
8 8 m
4 5 m
– 7 m
– 8 m
– 9 m
8 10 m
4 5 m
– 6 m
– 8 m
– 10 m
8 13 m
radial
2.0 m
2.5 m
3.0 m
3.0 m
3.5 m
3.0 m
3.0 m
3.0 m
3.0 m
3.5 m
3.0 m
3.5 m
3.5 m
4.0 m
3.5 m
3.0 m
3.0 m
4.0 m
4.5 m
5.5 m