Sound Adjustment; Adjusting The Sound - Sony FST-ZUX9 Operating Instructions Manual

Sound Adjustment

Adjusting the sound

Reinforcing the sound
You can reinforce the bass and create a
more powerful sound.
Press GROOVE repeatedly.
GROOVE ON* t Z-GROOVE ON* t
GROOVE OFF t GROOVE ON t ...
* The volume switches to power mode and the
equalizer curve changes.
Tip
The default setting is "GROOVE ON".
Selecting the preset effect
Press one of the preset effect
buttons to select the preset effect
you want.
Press USER EQ repeatedly to
select one of the user equalizer
setting.
You can also press EQ on the
remote repeatedly.
34 GB
Preset effect options
"SUR" lights up in the display if you
select an effect with surround effects.
Effect Category
ROCK, POP, Standard audio sources
JAZZ, DANCE,
SAMBA,
REGGAE,
HIP HOP,
TECHNO
FLAT Original audio source
(cancel the preset effect)
USER EQ 1, User equalizer setting
USER EQ 2, (see "Adjusting the
USER EQ 3 graphic equalizer or
selecting the surround
effect and storing the
user equalizer setting"
below)
Adjusting the graphic equalizer or
selecting the surround effect and
storing the user equalizer setting
You can adjust the sound by raising or
lowering the level of specific frequency
band or selecting the surround effect, then
store up to three user equalizer settings in
the memory.
1
Press EQ BAND/MEMORY
repeatedly to select a frequency
band or surround effect setting.
2
Turn OPERATION DIAL to adjust
the level or select the surround
effect you want.
Frequency band Equalizer level