Installing The Software - Dymo LabelWriter 450 Twin Turbo Quick Start Manual

2. Installing the Software

Do not connect the printer to your computer until after the software installation is complete.
Depending on your system configuration, the software installation could
Windows
take some time while the required Microsoft .NET
To install the software on a Windows system
Close all open Microsoft Office applications.
1
Insert the DYMO Productivity Software CD into your CD-ROM/DVD drive.
2
After a few seconds, the installation screen appears.
Click Install and follow the instructions in the installer.
3
If you have QuickBooks 2007 or later, you will be prompted to install the
QuickBooks
QuickBooks Add-in.
You will be prompted to install DYMO File software after DYMO Label software. You can
choose not to install DYMO File by clearing the check box during the installation. See
www.dymofile.com for information about DYMO File software.
To install the software on a Mac OS system
Insert the DYMO Productivity Software CD into the CD-ROM/DVD drive.
1
After a few seconds, the DYMO Label Installer icon appears.
Double-click the Installer icon and follow the instructions.
2
™
software is installed.
3