Panasonic FP2 S-LINK Technical Manual page 2

Safety Precautions
Observe the following notices to ensure personal safety or to prevent accidents.
To ensure that you use this product correctly, read this User's Manual thoroughly before use.
Make sure that you fully understand the product and information on safety.
This manual uses two safety flags to indicate different levels of danger.
WARNING
If critical situations that could lead to user's death or serious injury is assumed by
mishandling of the product.
- Always take precautions to ensure the overall safety of your system, so that the whole system
remains safe in the event of failure of this product or other external factor.
- Do not use this product in areas with inflammable gas. It could lead to an explosion.
- Exposing this product to excessive heat or open flames could cause damage to the lithium battery
or other electronic parts.
CAUTION
If critical situations that could lead to user's injury or only property damage is assumed
by mishandling of the product.
- To prevent excessive exothermic heat or smoke generation, use this product at the values less
than the maximum of the characteristics and performance that are assured in these specifications.
- Do not dismantle or remodel the product. It could cause excessive exothermic heat or smoke
generation.
- Do not touch the terminal while turning on electricity. It could lead to an electric shock.
- Use the external devices to function the emergency stop and interlock circuit.
- Connect the wires or connectors securely.
The loose connection could cause excessive exothermic heat or smoke generation.
- Do not allow foreign matters such as liquid, flammable materials, metals to go into the inside of the
product. It could cause excessive exothermic heat or smoke generation.
- Do not undertake construction (such as connection and disconnection) while the power supply is
on. It could lead to an electric shock.
Copyright / Trademarks
- This manual and its contents are copyrighted.
- You may not copy this manual, in whole or part, without written consent of Panasonic Electric
Works SUNX Co., Ltd.
- Windows and Windows NT are registered trademarks of Microsoft Corporation in the United States
and/or other countries.
- All other company names and product names are trademarks or registered trademarks of their
respective owners.
- Panasonic Electric Works SUNX Co., Ltd. pursues a policy of continuous improvement of the
design and performance of its products, therefore, we reserve the right to change the
manual/product without notice.
WOBATWOGND