Rebuilding A Raid Set - Asus KFSN5-D Manual

5.2.3

Rebuilding a RAID set

To rebuild a RAID set:
From the Array List, use the up or down arrow keys to select the RAID set
1.
you want to rebuild, then press <Enter>. The RAID set details appear.
[Ctrl-X]Exit [↑↓]Select [B]Set Bootable [N]New Array [ENTER]Detail
2. Press <R> and use the up and down arrow key to select a desired disk inside
the array.
3. Press <F7> to rebuild the array.
RAID Mode: Striped
Stripe Width:
Port
0.0
1.1
0.1
1.0
4. Press <Enter> to confirm the array
rebuilding, or <Esc> to cancel. The Array
List screen displays the RAID set after
rebuilding.
ASUS KFSN5-D
MediaShield BIOS
- Array List -
Boot Status
N/A Error NVIDIA
Array 4 : NVIDIA STRIPE
- Select Disk Inside Array -
4
Index Disk Model
0 XXXXXXXXXXXX
1 XXXXXXXXXXXX
2 XXXXXXXXXXXX
3 XXXXXXXXXXXX
[ ↑↓ ]Select [F6] Back
Apr 20 2007
Vendor Array
STRIPE
XXX.XXG
Stripe Block:
[F7] Finish
[ENTER] OK
Size
XXX.XXG
64K
Capacity
XX.XXGB
XX.XXGB
XX.XXGB
XX.XXGB
Rebuild array?
[ESC] Cancel
5-7