4A: Connecting The Audio Components - Sony HT-7200DH Operating Instructions Manual

Notes
• Be sure to turn on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
Tips
• To output the sound of the TV from the speakers
connected to the receiver, be sure to
– connect the audio output jacks of the TV to the
TV IN jacks of the receiver.
– turn off the TV's volume or activate the TV's
muting function.
• All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
4a: Connecting the audio
components
Connecting a Super Audio CD/CD
player/CD recorder
The following illustration shows how to
connect a Super Audio CD player, CD player
or CD recorder. Before connecting the cords,
be sure to disconnect the AC power cord.
After connecting your audio component,
proceed to "4b: Connecting the video
components" (page 20).
TV ANTENNA
OPTICAL
IN
AM
SAT
IN
OPTICAL
DVD
IN
COAXIAL
DIGITAL
(ASSIGNABLE)
OUT IN
DC5V
0.7A MAX
L
DMPORT
R
SA-CD/CD/CD-R
A Audio cord (not supplied)
Super Audio
CD player/
CD player/
CD recorder
A
SAT IN DVD IN
HD
XM
VIDEO VIDEO VIDEO VIDEO VIDEO
IN IN OUT IN OUT
MONITOR
AUDIO AUDIO AUDIO AUDIO AUDIO
IN
IN IN OUT IN OUT
TV SAT DVD VIDEO 1 SUB WOOF
19 US