Sony HT-7200DH Operating Instructions Manual page 63

XM Radio messages list
Message Explanation
appears
ANTENNA The XM antenna is not
connected to the XM Mini-
Tuner Dock or the XM
antenna cable is damaged.
UNAUTH You selected an XM channel
that is blocked or cannot be
received with your XM
subscription package.
NO SIGNL The XM Mini-Tuner is not
receiving the XM satellite
signal. The XM antenna's
view of the satellites may be
blocked or the antenna is not
properly aimed.
LOADING The XM Mini-Tuner is
acquiring audio or program
information from the XM
satellite signal. This message
can also appear if the signal is
too weak.
OFF AIR You selected an XM channel
that is not currently
broadcasting.
– – – – No artist name or song title is
available for this selection.
CH UNAVL The selected channel is not
available. The channel may
have been reassigned to a
different channel number. This
message may occur initially
with a new radio or a radio that
has not received XM's signal
for an extended period.
XM TUNER The XM Mini-Tuner is not
installed or not fully seated in
the XM Mini-Tuner Dock or
the XM Mini-Tuner dock is
not connected to the receiver.
– – The preset number entered is
an invalid number.
SIG-GOOD The signal strength is good.
SIG-MARG The signal strength is
marginal.
SIG-WEAK The signal strength is weak.
SIG-NONE There is no signal.
Remedies
Check that the XM antenna is connected to the XM Mini-
Tuner Dock securely and check the antenna cable for
damage. Replace the XM antenna if the cable is damaged.
Consult the latest channel guide at www.xmradio.com for the
current list of channels.
For information on receiving this channel, visit
www.xmradio.com or contact XM Satellite Radio at
1-800-967-2346.
Check the antenna for obstructions and reposition the XM
antenna to get a better signal reception.
To optimize the antenna position, see "Aiming the XM
Antenna" (page 57).
Refer to the instructions supplied with the XM Mini-Tuner
and Home Dock for antenna installation information.
This message should disappear when the signal is strong. If
you often see this message, reposition the XM antenna for
better signal reception.
To optimize the antenna position, see "Aiming the XM
Antenna" (page 57).
Check this XM channel later. In the meantime, select another
channel.
—
Consult the latest channel guide at www.xmradio.com for the
current list of channels. For a new radio or a radio that has not
received XM's signal for an extended period, allow the radio
to receive the XM satellite signal for at least 5 minutes and
then select the channel again.
Confirm the XM Mini-Tuner is fully seated in the dock and
check the XM Mini-Tuner dock cable is connected to the
receiver.
Enter a number from 1 to 30.
Adjust the antenna so that the signal is as strong as possible.
For details, see "Aiming the XM Antenna" (page 57).
63 US