Precise Thread Control - Husqvarna VIKING Amber Air S 600 User Manual

Precise Thread Control

Depending on the stitch, fabric and thread that is being used,
thread loops may either extend beyond the fabric edge, or
form too tightly around the fabric edge. If thread tension
(page 20, page 55) and the cutting width adjustment (page
52) are not quite enough, the Precise Thread Control (PTC)
gives you the possibility to do further adjustment. The
Precise Thread Control will allow very small movements of
the stitch finger to compensate, so that the thread loops
form neatly around the fabric edge.
Move the Precise Thread Control lever towards "+" (A) to
A
increase the width of the loops. Move the lever towards "-"
B
(B) to decrease the width of the loops.
Tip: Read more about stitch adjustments and PTC, page 53.
2 Preparations 17