Toro Reelmaster 5200-D Service Manual page 94

11. Use an 8-32 machine screw to remove motor shaft
bearing retaining pin from housing (Fig. 51).
12.Remove motor shaft from housing (Fig. 52).
13.Press motor shaft out of the bearings and spacer
(Fig. 53).
14.Remove spiral retaining ring and remove PTO seal
guide (with O-ring) from the housing (Fig. 54).
Hydraulic System Page 4 - 50
Figure 51
Figure 52
Figure 53
Figure 54
Reelmaster 5200-D/5400-D