C H A P T E - Cisco Catalyst 9200 Configuration Manual

Administering the Device
•
•
•
•
•
Information About Administering the Device
System Time and Date Management
You can manage the system time and date on your device using automatic configuration methods (RTC and
NTP), or manual configuration methods.
Note For complete syntax and usage information for the commands used in this section, see the Cisco IOS
Configuration Fundamentals Command Referenceon Cisco.com.
System Clock
The basis of the time service is the system clock. This clock runs from the moment the system starts up and
keeps track of the date and time.
The system clock can then be set from these sources:
• NTP
• Manual configuration
The system clock can provide time to these services:
• User show commands
• Logging and debugging messages
Information About Administering the Device, on page 1
How to Administer the Device, on page 10
Configuration Examples for Device Administration, on page 41
Additional References for Device Administration, on page 43
Feature History for Device Administration, on page 44
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
1
C H A P T E R
1