Cisco Catalyst 9200 Configuration Manual page 200

Creating a Configuration Archive
Command or Action
Device(config-archive)# path flash:myconfiguration
Step 5
maximum number
Example:
Device(config-archive)# maximum 14
Step 6
time-period minutes
Example:
Device(config-archive)# time-period 1440
Step 7 end
Example:
Device(config-archive)# end
Step 8
archive config
Example:
Device# archive config
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
186
Configuration Replace and Configuration Rollback
Purpose
If a directory is specified in the path instead of
Note
file, the directory name must be followed by a
forward slash as follows: path flash:/directory/.
The forward slash is not necessary after a
filename; it is only necessary when specifying a
directory.
(Optional) Sets the maximum number of archive files of
the running configuration to be saved in the Cisco IOS
configuration archive.
• The number argument is the maximum number of
archive files of the running configuration to be saved
in the Cisco IOS configuration archive. Valid values
are from 1 to 14. The default is 10.
Note Before using this command, you must configure
the path command to specify the location and
filename prefix for the files in the Cisco IOS
configuration archive.
(Optional) Sets the time increment for automatically saving
an archive file of the current running configuration in the
Cisco IOS configuration archive.
• The minutes argument specifies how often, in minutes,
to automatically save an archive file of the current
running configuration in the Cisco IOS configuration
archive.
Before using this command, you must configure
Note
the path command to specify the location and
filename prefix for the files in the Cisco IOS
configuration archive.
Exits to privileged EXEC mode.
Saves the current running configuration file to the
configuration archive.
The path command must be configured before
Note
using this command.