Temperature Settings; Modes Of Operation - Aube Technologies TH106 Owner's Manual

5. Temperature Settings

Setpoint
The thermostat normally displays the actual temperature. To
view the setpoint, press the
setpoint will appear for the next 5 seconds.
To change the setpoint, press the
desired temperature is displayed. To scroll faster, hold the
button.
Using a preset temperature
The thermostat has 3 preset temperatures:
• Comfort temperature
• Economy temperature
• Vacation temperature
Icon Intended Use
Comfort (when at home) 70°F (21°C)
Economy (when asleep
or away from home)
Vacation (during
prolonged absence)
• To use the Comfort or Economy temperature, press the
or button respectively. The corresponding icon will be
displayed.
• To use the Vacation temperature, press both
buttons simultaneously. The
Storing a preset temperature
To store the Comfort or Economy temperature:
Set the desired temperature using the
Press and hold the appropriate button (
approximately 3 seconds until the corresponding icon
is displayed.
To store the Vacation temperature:
Set the desired temperature using the
Press and hold both
for approximately 3 seconds until the
played.

6. Modes of Operation

Automatic - The temperature is set according to the
programmed schedule. To place the thermostat in this mode,
press the Mode button until
current period and preset temperature are also displayed.
Temporary Bypass: If you modify the setpoint (by pressing
the , or button) when the thermostat is in
, ,
automatic mode, the new setpoint will be used until the end
of the current period. When the next period starts, the
temperature set for that period becomes the new setpoint. To
cancel the bypass, press the Mode button.
Manual - The programmed schedule is not used. The
temperature must be set manually. To place the thermostat
in this mode:
or button briefly. The
or button until the
Factory Setting
62°F (16.5°C)
50°F (10°C)
and
icon will be displayed.
or button.
or ) for
or button.
and buttons simultaneously
icon is dis-
is displayed. The icons of the
TH106, TL6160 PROGRAMMABLE THERMOSTAT
1. Press the Mode button until
2. Set the temperature using the
7. Schedule
The schedule consists of 4 periods per day which represents
a typical weekday. You can program the thermostat to skip
the periods that do not apply to your situation. For example,
you can skip periods 2 and 3 for the weekend.
Period Description
Wake
Leave
Return
Sleep
The Comfort ( ) temperature is used in periods 1 and 3 and
the Economy ( ) temperature is used in periods 2 and 4. For
example, when the period changes from 1 to 2, the setpoint
automatically changes from Comfort setting ( ) to Economy
setting ( ).
You can have a different program for each day of the week;
i.e., each period can start at different time for each day of the
week. The thermostat has been programmed with the
following schedule.
Period Setting MO
6:00 6:00
AM AM
8:00 8:00
AM AM
6:00 6:00
PM PM
10:00 10:00
PM PM
To modify the schedule:
1. Press Pgm to access the programming mode. Period 1
is selected.
2. Press Day to select the day to program (hold for 3 sec-
onds to select the entire week.)
3. Press Hour and Min to set the start time of the
selected period, or press Clear if you want to skip the
period (--:-- is displayed).
4. Press Pgm to select another period, or press Day to
select another day. Then repeat step 3.
5. Press Mode to exit the programming mode.
NOTE: If no button is pressed for 60 seconds, the thermo-
stat will automatically exit the programming mode.
3
is displayed.
, , or
Setting
TU WE TH FR
6:00 6:00 6:00 6:00
AM AM AM AM
8:00
8:00 8:00 --:--
AM AM
AM
6:00 6:00 6:00 --:--
PM PM PM
10:00 10:00 10:00 10:00
PM PM PM PM
button.
SA SU
6:00
AM
--:--
--:--
10:00
PM
69-2202—07