Dual XDMA7715 Installation & Owner's Manual page 8

XDMA7715 OPERATION
General Operation
*Subwoofer
Source Audio Memory
8
Audio Press AUDIO momentarily to select between Volume
(default), Bass, Treble, Balance, Fader and *Subwoofer.
VOLUME
Press AUDIO until BAS appears then rotate encoder
Bass
left/right to adjust ( -6 minimum / +6 maximum).
Press AUDIO until TRE appears then rotate encoder
Treble
left/right to adjust ( -6 minimum / +6 maximum).
Press AUDIO until BAL appears then rotate encoder
Balance
left/right to adjust (BAL L 1-BAL 00-BAL R 1).
BAL 00 represents equal balance
Fader Press AUDIO until FAD appears then rotate encoder
left/right to adjust (FAD F 1-FAD 00-FAD R 1).
FAD 00 represents equal fader
Press AUDIO until SUB appears then rotate encoder
left/right to adjust (0 minimum / +1 maximum).
Individual Bass and Treble settings are retained in memory
for AM, FM, CD, AUX, iPod and Bluetooth modes. This allows
you to save the Bass and Treble settings separately for each
mode.
Note:
Any adjustment to the Bass or Treble settings automatically
cancels the current EQ curve (if one is selected).
Reset Press RESET upon initial installation or if abnormal
operation occurs. The reset button is located behind the
faceplate.
*Note Subwoofer option must be enabled before it will appear in
the audio menu. Refer to page 7 for details.
BASS TREBLE BALANCE FADER *SUBWOOFER