Volume Bass Treble Balance Fader - Dual XDM6830 Installation & Owner's Manual

XDM6830
General Operation - Audio Settings
Source Audio Memory
8
OPERATION
Audio Press rotary encoder momentarily to select between
Volume (default), Bass, Treble, Balance & Fader.
VOLUME
Bass Press rotary encoder until BAS appears then rotate encoder
left/right to adjust ( -6 minimum / +6 maximum).
Treble Press rotary encoder until TRE appears then rotate encoder
left/right to adjust ( -6 minimum / +6 maximum).
Balance Press rotary encoder until BAL appears then rotate encoder
left/right to adjust (BAL L 12-BAL 00-BAL R 12).
BAL 00 represents equal balance
Fader Press rotary encoder until FAD appears then rotate encoder
left/right to adjust (FAD F 12-FAD 00-FAD R 12).
FAD 00 represents equal fader
Individual Bass and Treble settings are retained in memory
for AM, FM, CD, and AUX modes. This allows you to save the
Bass and Treble settings separately for each mode.
Example:
FM tuner mode can have Bass +3 and Treble -1 while CD
mode can have Bass +2 and Treble +2.
Note:
Any adjustment to the Bass or Treble settings automatically
cancels the current EQ curve (if one is selected).
Press and hold for more than 2 seconds to RESET the unit
Reset
upon initial installation or if abnormal operation occurs. The
reset button is located behind the faceplate.
BASS TREBLE BALANCE FADER