Advertisement
DXDM228BT
OPERATION
General Operation
Power On/Off
Press
or any other button (except EJECT) to turn the unit
on. Press and hold
to turn the unit off.
Press MODE to select between Radio, Disc, USB, Auxiliary
Mode
Input and Bluetooth. Modes of operation are shown in the
display.
NOTE: CD and USB modes will not appear unless a CD is
inserted or USB device is connected.
Insert a 3.5mm cable into the unit's front AUX port. Press
Auxiliary Input
MODE to select auxiliary input mode.
Insert a USB device into the unit's front AUX port. Press
USB Port
MODE to select auxiliary input mode.
Adjust volume using volume knob (00-40).
Volume
Press to silence the audio. Press again to resume listening
Mute
at the previously selected volume.
Display
Press and hold DISP to momentarily display the clock.
Reset
Press RESET upon initial installation or if abnormal
operation occurs.
Setup Menu
Press and hold the volume knob to enter the setup menu.
Press the volume knob quickly to step through the available
menu functions, then rotate the volume knob left/right to
adjust.
6
Advertisement
