Installation
Electrical connection
ATTENTION:
Before installation or servicing,
disconnect the power supply by
either removing the fuse, shutting off
the main power or manually
"tripping" the circuit breaker.
Installation work and repairs should
only be performed by a qualified
technician in accordance with all
applicable codes and standards.
Repairs and service by unqualified
persons could be dangerous and the
manufacturer will not be held
responsible.Installation, repair, and
maintenance work should only be
performed by a Miele-authorized
service technician. Work by
unqualified persons can cause
considerable danger to users. Miele
cannot be held liable for any damage
arising as a result of such work.
Before connecting the appliance to
the power supply, make sure that the
voltage and frequency listed on the
rating label correspond with the
household electrical supply. This
data must correspond to prevent
appliance damage.
Consult an electrician if in doubt.
For safety reasons, the cooktop may
only be used when it has been fully
installed into the countertop.
62
This cooktop must be grounded in
compliance with local or national
codes.
Installation, repair, and maintenance
work must only be performed by a
technician authorized by Miele in
compliance with local codes and the
ANSI National Electrical
Code / NFPA 70 in the United States
or the Canadian Electric Code, CSA
C22.1-02. for Canada.
Installer:
Please leave these instructions with
the customer.