Miele KM 6310 Operating And Installation Instructions page 42

Cleaning and care
Cleaning the ceramic surface

Risk of damage from sharp and
pointed objects.
The seal between the cooktop and
the countertop could be damaged.
The seal between the ceramic
surface and the frame could be
damaged.
Do not use sharp and pointed
objects for cleaning.
Using dish detergent to clean the
cooktop will not remove all soiling
and residues. It forms an invisible
coating which will cause permanent
discolouration of the ceramic
surface. This discolouration cannot
be removed.
Clean the ceramic surface regularly
with a suitable ceramic cooktop
cleaning agent.
 First, wipe away all coarse soiling
from the surface using a damp cloth.
Stubborn soiling may need to be
removed with a scraper blade.
 Then clean the ceramic surface with
the Miele Ceramic and Stainless Steel
Cleaner (see "Optional accessories –
Cleaning and care products") or with
a proprietary ceramic cleaner applied
with a paper towel or a clean cloth.
Do not put the cleaner on a hot
cooktop since this may cause
spotting. Please follow the cleaning
agent manufacturer's instructions.
 Remove any cleaner residue with a
damp cloth and then dry the ceramic
surface.
42
Residues can burn onto the cooktop
the next time it is used and cause
damage to the ceramic surface.
Ensure that all cleaning agent residues
are removed.
 Spots from lime deposits, water, and
aluminum deposits (shiny metallic
spots) can be removed with a
ceramic and stainless steel cleaner.

Risk of burning due to hot
cooking zones.
The cooking zones are hot during
use.
Wear oven mitts when using a
scraper blade to remove sugar,
plastic, or aluminum foil residues
from a hot cooktop.
 Should any sugar, plastic, or
aluminum foil spill or fall onto a hot
cooking zone while it is in use, first
switch off the cooktop.
 Then carefully scrape off these
residues immediately while they are
still hot, using a shielded scraper
blade.
 Afterwards, clean the ceramic surface
in its cooled state, as described
above.