Draytek VigorPro 5300 Quick Start Manual page 7

Interface
Factory Reset
Restart
WAN(1/2)
LAN (1-4)
PWR
ON/OFF
VigorPro 5300 Series Quick Start Guide
Description
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for
more than 5 seconds. When you see the ACT LED begins to blink rapidly than
usual, release the button. Then the router will restart with the factory default
configuration.
Restart the router forcefully.
Connecters for remote networked devices.
Connecters for local networked devices.
Connecter for a power adapter.
Power Switch.
3