For Vigorpro5300Vsn - Draytek VigorPro 5300 Quick Start Manual

1 . 1 . 5 F o r V i g
1 . 1 . 5 F o r V i g
LED
ACT (Activity)
IDP (Intrusion Detection and
Prevention)
Virus
WLAN
WAN1/2
MGMT
Phone 1/2
LED on Connector
ISDN S0 1
ISDN S0 2
WAN 1/2
10
o r P r o 5 3 0 0 V S n
o r P r o 5 3 0 0 V S n
Status
Blinking
Off
On
(Yellow)
On
(Yellow)
On
Blinking
On
Blinking
On
Blinking
On
Off
Blinking
On
Left LED
(Orange)
Blinking
On
Right LED
(Green)
Blinking
On
Left LED
(Orange)
Blinking
Off
Right LED On
(Green)
Blinking
Left LED On
(Green)
Off
Explanation
The router is powered on and running normally.
The router is powered off.
The anti-intrusion function is enabled.
The anti-virus function is enabled.
Wireless access point is ready.
It will blink slowly while wireless traffic goes
through.
If ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and it will
return to normal condition after two minutes. (You
need to setup WPS within 2 minutes.)
The WAN1 or WAN2 connection is ready.
It will blink while transmitting data.
The router is managed by Telnet.
It will blink while being managed by IE browser.
The phone connected to this port is off-hook.
The phone connected to this port is on-hook.
A phone call comes.
ISDN NT (ISDN S0 intern) mode is active and an
ISDN phone adapter is connected.
ISDN NT (ISDN S0 intern) mode is active and an
ISDN phone adapter is not connected.
A phone has been connected. If not, green LED will
be off.
An ISDN phone is off-hook or a phone call comes.
ISDN NT (ISDN S0 intern) mode is active
configured from VoIP>>Phone Settings and an
ISDN phone adapter is connected.
ISDN NT (ISDN S0 intern) mode configured from
VoIP>>Phone Settings is active and an ISDN
phone adapter is not connected.
It means ISDN TE mode is active which is
configured from VoIP>>Phone Settings.
A phone adapter with phone set has been connected
(ISDN S0 intern mode) or ISDN line has been
connected (ISDN S0 extern mode). It will be off if
there is nothing connected.
In ISDN NT (ISDN S0 intern) mode, it means an
ISDN phone is off-hook or a phone call comes.
In ISDN TE mode, it means data, fax or voice
(phone call) is transmitting.
The port is connected.
The port is disconnected.
VigorPro 5300 Series Quick Start Guide