Draytek VigorPro 5300 Quick Start Manual page 11

Interface
Wireless LAN
ON/OFF/WPS
Factory Reset
Restart
Phone (1/2)
WAN (1/2)
LAN (1-4)
PWR
ON/OFF
VigorPro 5300 Series Quick Start Guide
Description
Press "Wireless LAN ON/OFF/WPS" button for 2 seconds to wait for client
device making network connection through WPS.
Press "Wireless LAN ON/OFF/WPS" button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
Restore the default settings. Usage: Turn on the router (ACT LED is blinking).
Press the hole and keep for more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Restart the router forcefully.
Connecters for PSTN phones.
Connecters for remote networked devices.
Connecters for local networked devices.
Connecter for a power adapter.
Power Switch.
7